What Dimm Slots To Use For Dual Channel

The 8gb sodimm will garner a better performing system simply as a result of the benefits of the additional 4gb of memory being available. Yes, you can but as others have stated today’s mainstream boards are dual channel and running a third stick would put it in single channel mode which means it would run at half the bandwidth of dual channel memory thereby slowing your system memor.

2GB OCZ Tech PC26400 1GB DIMM 800 MHz DDR2 SDRAM Memory

As already established, most modern motherboards have dual channel architectures.

What dimm slots to use for dual channel. Matched dimm configuration in each channel. Matched in symmetrical memory slots. Therefore, if you use a weak processor, you may want dual channel or quad channel ram to avoid the excess load.

Dimm slots of the same colour indicate different channels. We suggest that you install the modulesinto slots a2 and b2 for better compatibility. We have got four ram slots on the board.

Dual channel mode cannot be enabled if only one memory module is installed. What about this, could it be increased to 16 gb?. (8gb modules in all 4 dimm slots for 32gb total).

If you’re a person who cares about aesthetics, you may want to fill up your dimm slots. On a four slot board you then skip over the second on the first channel for the first on the second. If you look at the certain motherboard, they make it easy for you because there is dim one to dim three and four.

So we are going to do it because we have two modules. In the figure, dimm1 and dimm3 are on channel a, whereas dimm2 and dimm4 are on channel b. Now, the color depends on the type of motherboard you have but there will always be at least 2 different colors for motherboards with 4 dimm slots.

The slots must be able to use three identical ddr3 dimms. If it is a new motherboard then it. If my memory serves me right, dual channel uses the first (2) dimm slots.

Make sure that each dimm is an exact specification match of the other dimm. In terms of aesthetics, using two or four sticks of ram on a motherboard with four dimm slots will make your build look cleaner. You can certainly put another 4gb stick in the other channel but whether or not dual channel will be supported you will have to look at your motherboards specs.

Motherboards that use triple channel must have at least three dimm slots. We are going to want to put them in a certain configuration. The main thing is that you need to install memory in matched sets of 2 dimm modules (using pairs of 2gb, 4gb or 8gb modules in the available slots).

Actually the board isn't set in dual channel mode when two dimms are on one channel. The 2 and 4 slots on some boards will be a light blue, green. I have read several posts that indicate the guide is incorrect and my experience has been to use lower numbered slots first, i.e.

Due to cpu limitations, read the following guidelines before installing the memory in dual channel mode. 1 gb, 2 gb, 4 gb. Firstly 4gb is not to bad for ordinary general use.

Review the manual to determine the proper dimm numbering and insertion positioning. Motherboards with dual channel memory architecture. You can imagine the tracks from one channel going to slot 1 then 2, and the other channel going to 3 then 4.

The asus pro gaming guide recommends if using two dimms, insert one in dimm_a2 and one in dimm_b2. I am building on asus h170 pro gaming motherboard that has four dimm slots. In practice, as long as you put one module in slots 1 or 2, and the other in 3 or 4, you get dual channel.

Meaning that if you're running a total of 32gb, your system will see better performance if you buy a memory kit that is (2) sticks of 16gb, verses buying a kit that is (4) sticks of 8gb, as only the first two dimm slots are dual channel. The first dimm slot on most boards is usually required to have something in it. The 2 and 4 is for most boards that likely have daisy chain topology.

Vengeance® — 8GB Dual Channel DDR3 Memory Kit 1866 MHz PC3